House Cleaning – Guide To Cleaning Toilet

House Cleaning – Guide To Cleaning Toilet – Toilet cleaning is important for your house’s appearance and hygienic purposes. If the toilet is not cleaned regularly, it may begin to look very dirty and unsightly. There are times when cleaning the toilet alone can be a difficult task because you have to stretch to get under the seat or behind the bowl.

You want your toilet to be clean, but you also do not want extra work. Read on – House Cleaning – Guide To Cleaning Toilet

When to clean the toilet

The frequency with which you should clean your bathroom will depend upon the person’s biology in your household. For example, if one or more children are teenagers, then they may need to use the bathroom more often in the evenings when coming home from school.

Another factor determining how often you need to clean is if people are sick in your family. If there are any conditions such as stomach flu, strep throat, etc., it is important to clean the toilet more often so that everyone can stay healthy.

What You’ll Need To Clean Your Toilet

To clean a toilet, you will need a few things:

• Baking Soda
• Water
• Vinegar
• Scrub brush
• Bucket

How To Clean Your Toilet Step By Step

Step 1: Put on gloves to protect your hands and make sure you wear socks, shoes, or slippers. You must always wear shoes or some other type of footwear when cleaning your toilet because it is often wet and can be slippery.

Step 2: Add water to a bucket and pour the baking soda. The amount of water and baking soda you should add will vary depending on how large or small your bucket is; however, if you happen to put too much into the bucket, the baking soda will just dissolve into the water. After you have poured in the baking soda and water, mix it up a little bit with your hand.

Step 3: Make sure that there is enough vinegar to create a thick paste inside the toilet bowl. Do not mix this paste until you are ready to apply it to the bowl. Pour some vinegar into the toilet bowl to make a thick paste.

Step 4: Use the scrub brush to scrub the inside of the toilet bowl, moving in circles to ensure that you are cleaning every spot possible. After doing this for several seconds, stop and look at how dirty your water is. If you notice that there is still a lot of dirt or grime, continue scrubbing for another few seconds before checking again.

After scrubbing the inside of the toilet bowl with the brush, take a look at how dirty your water is. If you see any spots that are not completely clean, then use the brush to scrub those areas as well. You may need to do this for several seconds before checking the water again and if you still notice that there is dirt or grime, keep scrubbing until it’s clean.

Step 5: Flush the bowl and let everything go down with the water. After completing your toilet cleaning process, flush the toilet to push any leftover bacteria down and away from the bowl.

Step 6: Wait for a moment and then wipe off the outside of the toilet with a cloth to ensure there is no dirt or grime left. After completing your cleaning process, you can use a clean cloth to wipe down any spots on the outside of the toilet bowl to ensure the entire bathroom looks as good as new.

Step 7: Empty your bucket and wipe it down so that you do not track any dirt into other areas of your home. After completing all of your steps, empty your bucket and clean it with water and soap before putting it back into storage.

How To Keep Your Toilet Clean Long Term

After you have cleaned your toilet, there are some things that you can do to make sure it stays clean long term:

• Spray baking soda inside of the bowl before bed every night to keep bacteria from building up on the surface of the bowl.

• Scrub the toilet every week with the same process outlined in this guide.

• Avoid flushing any items that are not waste or toilet paper down your bowl because doing so can cause waste to build up around the rim and below, which is difficult to clean.

• Keep the lid closed when you are not using the bathroom to prevent dirt, dust, and other particles from landing on the top of the bowl.

• Cover the toilet with a protective mat to prevent dirt and other particles from falling into or getting stuck in between crevices around the rim.

How To Clean Your Toilet Brush & Scrub Head

You should clean your toilet brush once every month if you use it regularly. Here are the steps that you need to follow:

Step 1: Unplug the toilet brush from its holder.

Step 2: Flush the toilet to push everything down into the bowl.

Step 3: Pour some vinegar onto a cloth and then use it to scrub away any leftover dirt or grime on your toilet brush handle.

Step 4: Pour some baking soda into the bottom of your toilet brush holder. Pour some baking soda into the bottom of your toilet brush holder to ensure that you are not rubbing on any leftover particles from cleaning.

Step 5: Mix up a solution of half water and half vinegar inside of a bucket and then dip the toilet brush into the solution.

Step 6: Use your scrub brush to mix the baking soda and water to create a paste. You should mix baking soda with water to clean off any dirt or residue on your toilet scrub head so that you’re not just pushing around leftover bacteria when you start cleaning again in a week.

Step 7: Scrub the toilet brush against the bottom and sides of your toilet bowl to remove any leftover bacteria and particles. Scrub around the outside of the bowl with your wet scrub brush to clean it before using it again.

How To Clean Your Toilet Bowl Ring

You should scrub down your toilet bowl ring at least once every two weeks to ensure that your toilet does not develop any stains or bacteria. Here are the steps that you need to follow:

Step 1: Clean off any grime or dirt on the outside of the toilet bowl. Begin by cleaning any grime, dirt, or dust off of the outside of your toilet bowl to ensure that the chemicals you are using do not get absorbed into your floor.

Step 2: Pour some white vinegar into a spray bottle.

Step 3: Spray down the rim of your toilet until it is completely wet with vinegar. Spray all over the outside rim of your toilet bowl until it is fully covered with white vinegar.

Step 4: Wait for your toilet ring to soak in the vinegar before scrubbing it again. Allow the vinegar time to soak into any small cracks or crevices on the outside of your bowl for between 5 and 10 minutes before you scrub it down again.

Step 5: Dip a sponge into a mixture of baking soda and water before scrubbing the outside rim. Mix baking soda with water in a small bowl to create a paste.

Step 6: Scrub the ring on the outside of your toilet bowl with your homemade paste using an abrasive sponge.

Step 7: Rinse off any leftover particles or grime on the outside of your bowl with water.

Step 8: Flush your toilet to push all the vinegar and particles down towards the drain.

House Cleaning – Guide To Cleaning Toilet
Conclusion

Sometimes cleaning a toilet can be difficult because of how hard it is to reach certain parts of the bowl or under the seat with a sponge or cloth alone.

You want your toilet to be clean, but you also do not want anything to be strenuous for yourself. An important aspect of cleaning the toilet is scrubbing it with a brush because it removes any dirt or grime that can accumulate in the hard-to-reach areas. To make sure your bathroom always looks its best, make sure you regularly clean the toilet.